CL Free Water Systems
BBB Report


CL Free offers 2 different pool systems. The first is the standard digital pool system and the second is our totally automated pool system with PH management.

 

CL Free Standard Digital Pool System
 
System Components:

  • CL Free Digital Controller

  • CL Free Flow Cell

  • Power Supply and Stainless Steel electrical connections

 

 

 

CL Free Digital Pool System
With Automatic PH Control with Flow Control Valve
 

System Components:

  • CL Free Digital Controller

  • CL Free Flow Cell

  • PH Injector

  • Liquid Filled PH Sensor Reader

  • Electronic Solenoid

  • Power Supply and Stainless Steel electrical connections

  • Automated PH sensor using CO˛ in place of muriatic acid.

ALSO AVAILABLE IN 2 TANK CONFIGURATIONS

Click here to see how it works with
or without automatic PH adjustment.

 

 

Why People CHOOSE
CL Free DIGITAL Pool Water Systems

CL Free Water Systems Pool/Spa System sanitizes and protects your pool water
and gives you a chlorine and salt free swimming experience. The system eliminates chlorine, chemicals and other impurities from your water. As it freshens and sanitizes your water, the system also kills and protects your water from bacteria and algae by adding copper ions and oxidizing carbon based impurities in the water with titanium created OH. The CL Free Water Systems Pool/Spa System significantly reduces the calcium buildup in the pool equipment and along the pool and spa water lines.

1. The power settings for the Oxidation and Ionization functions are independent. This provides flexibility and total control. Other units tie both sets of functions to each other providing no flexibility or independent control.

2. Oxidation and Ionization functions can be energized at the same time. Other units make you manually select and switch between which functions/plates are energized.

3. LEDs flash at different frequencies to indicate that the corresponding functions have been activated and at what power level. Faster flash means higher power.

4. LEDs alternate color (red and green) to indicate that the polarity of the functions/plates has been switched. This swap balances the copper plate usage and helps keep the plates clean.

5. Copper Ionization has a built-in startup setting (to quickly bring your pool/spa up to the desired copper level) and 8 different maintenance settings (to maintain the desired copper level). If the system is run nonstop, after 24 hours it resets itself and begins its daily cycle again.

With CL Free’s Automated PH controller, you get all the above plus…

6. Based on the Controller pH setting, the pH sensor determines if pH adjustment should be made or not. As pH reduction is needed, co2 is injected in metered, controlled regular intervals.

7. Your pool/spa's pH is displayed every 30 seconds on the controller's readout.

8. pH calibration is a snap. Push the calibrate button 2 seconds, enter the pool's actual pH, press the button again, you're done.

9. The system consists of a CL Free Systems Oxidation Chamber with titanium and copper plates, Pool/Spa controller, pH sensor, Flow Meter Controlled co2 Regulator, and UL approved power supply and wiring harness.

 

Copyright © ChlorineFreeUSA. All Rights Reserved.